document number: 94559 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 07-oct-08 1 high performance schottky generation 5.0, 2 x 15 a 30cpt100 vishay high power products features ? 175 c high performance schottky diode ? very low forward voltage drop ? extremely low reverse leakage ? optimized v f vs. i r trade off for high efficiency ? increased ruggedness for reverse avalanche capability ? rbsoa available ? negligible switching losses ? submicron trench technology ? full lead (pb)-free and rohs compliant devices ? designed and qualified for industrial level applications ? high efficiency smps ? automotive ? high frequency switching ? output rectification ? reverse battery protection ? freewheeling ? dc-to-dc systems ? increased power density systems product summary i f(av) 2 x 15 a v r 100 v v f at 15 a at 125 c 0.67 v to-247ac anode 13 2 base common cathode 2 common cathode anode major ratings and characteristics symbol characteristics values units v rrm 100 v v f 15 apk, t j = 125 c (typical, per leg) 0.63 t j range - 55 to 175 c voltage ratings parameter symbol test conditions 30cpt100 units maximum dc reverse voltage v r t j = 25 c 100 v absolute maximum ratings parameter symbol test conditions values units maximum average forward current per leg i f(av) 50 % duty cycle at t c = 158 c, rectangular waveform 15 a per device 30 maximum peak one cycle non-repetitive surge current i fsm 5 s sine or 3 s rect. pulse following any rated load condition and with rated v rrm applied 920 10 ms sine or 6 ms rect. pulse 240 non-repetitive avalanche energy e as t j = 25 c, i as = 1.1 a, l = 60 mh 36 mj repetitive avalanche current i ar limited by frequency of operation and time pulse duration so that t j < t j max. i as at t j max. as a function of time pulse see fig. 8 i as at t j max. a
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 94559 2 revision: 07-oct-08 30cpt100 vishay high power products high performance schottky generation 5.0, 2 x 15 a note (1) pulse width < 300 s, duty cycle < 2 % electrical specifications parameter symbol test conditions typ. max. units forward voltage drop per leg v fm (1) 15 a t j = 25 c -0.81 v 30 a - 0.92 15 a t j = 125 c -0.67 30 a - 0.79 reverse leakage current per leg i rm (1) t j = 25 c v r = rated v r - 120 a t j = 125 c - 5 ma junction capacitance per leg c t v r = 5 v dc (test signal range 100 khz to 1 mhz) 25 c 550 - pf series inductance per leg l s measured lead to lead 5 mm from package body 7.5 - nh maximum voltage rate of change dv/dt rated v r - 10 000 v/s thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 55 to 175 c maximum thermal resistance, junction to case per leg r thjc dc operation 1.4 c/w maximum thermal resistance, junction to case per device 0.8 typical thermal resistance, case to heatsink r thcs mounting surface, smooth and greased 0.25 approximate weight 6g 0.21 oz. mounting torque minimum 6 (5) kgf cm (lbf in) maximum 12 (10) marking device case style to-247ac 30cpt100
document number: 94559 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 07-oct-08 3 30cpt100 high performance schottky generation 5.0, 2 x 15 a vishay high power products fig. 1 - maximum forward voltage drop characteristics fig. 2 - typical values of reverse current vs. reverse voltage fig. 3 - typical junction capacitance vs. reverse voltage fig. 4 - maximum thermal impedance z thjc characteristics forward voltage drop - v fm (v) instantaneous forward current - i f (a) 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1 10 100 tj = 25c tj = 125c tj = 175c reverse current - i r (ma) reverse voltage - v r (v) 020406080100120 0.0001 0.001 0.01 0.1 1 10 100 75c 100c 50c 125c 150c 175c 25c reverse voltage - v r (v) junction capacitance - c t (pf) 0 20 40 60 80 100 120 100 1000 t 1 , rectangular pulse duration (seconds) thermal impedance z thjc (c/w) 1e-05 1e-04 1e-03 1e-02 1e-01 1e+00 1e+01 0.001 0.01 0.1 1 10 single pulse (thermal resistance) d = 0.2 d = 0.25 d = 0.33 d = 0.5 d = 0.75
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 94559 4 revision: 07-oct-08 30cpt100 vishay high power products high performance schottky generation 5.0, 2 x 15 a fig. 5 - maximum allowable case temperature vs. average forward current fig. 6 - forward power loss characteristics fig. 7 - maximum non-repetitive surge current note (1) formula used: t c = t j - (pd + pd rev ) x r thjc ; pd = forward power loss = i f(av) x v fm at (i f(av) /d) (see fig. 6); pd rev = inverse power loss = v r1 x i r (1 - d); i r at v r1 = 80 % rated v r average forward current - i f (av) (a) allowable case temperature (c) 0 5 10 15 20 25 140 150 160 170 180 dc square wave (d=0.50) 80% rated vr applied see note (1) average forward current - i f (av) (a) average power loss - (watts) 0 5 10 15 20 25 0 3 6 9 12 15 180 120 90 60 30 dc rms limit square wave pulse duration - t p (microsec) non-repetitive surge current - i fsm (a) 10 100 1000 10000 100 1000
document number: 94559 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 07-oct-08 5 30cpt100 high performance schottky generation 5.0, 2 x 15 a vishay high power products fig. 8 - reverse bias safe operating area (avalanche current vs. rectangular pulse duration) fig. 9 - reverse bias safe operating area (avalanche energy vs. re ctangular pulse duration) 0 0 1 0 1 1 0.1 1 10 100 tj = 25c tj = 125c tj = 175c rectangular pulse duration ( sec) avalanche current (a) 0 0 1 0 1 1 1 10 100 tj = 25c tj = 125c tj = 175c rectangular pulse duration ( sec) avalanche energy (mj)
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 94559 6 revision: 07-oct-08 30cpt100 vishay high power products high performance schottky generation 5.0, 2 x 15 a ordering information table 1 - current rating (30 a) 2 - circuit configuration: c = common cathode 3 - package: p = to-247 4 - t = trench 5 - voltage code (100 v) tube standard pack quantity: 25 pieces device code 5 13 24 30 c p t 100 links to related documents dimensions http://www.vishay.com/doc?95223 part marking information http://www.vishay.com/doc?95226
outline dimensions www.vishay.com vishay semiconductors revision: 16-jun-11 1 document number: 95223 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters and inches notes (1) dimensioning and tolera ncing per asme y14.5m-1994 (2) contour of slot optional (3) dimension d and e do not include mold flas h. mold flash shall not exceed 0.127 mm (0 .005") per side. these dimensions are measu red at the outermost extremes of the plastic body (4) thermal pad contour optional with dimensions d1 and e1 (5) lead finish uncontrolled in l1 (6) ? p to have a maximum draft angle of 1.5 to the top of the part with a maximum hole diameter of 3.91 mm (0.154") (7) outline conforms to jede c outline to-247 with ex ception of dimension c symbol millimeters inches notes symbol millimeters inches notes min. max. min. max. min. max. min. max. a 4.65 5.31 0.183 0.209 d2 0.51 1.30 0.020 0.051 a1 2.21 2.59 0.087 0.102 e 15.29 15.87 0.602 0.625 3 a2 1.50 2.49 0.059 0.098 e1 13.72 - 0.540 - b 0.99 1.40 0.039 0.055 e 5.46 bsc 0.215 bsc b1 0.99 1.35 0.039 0.053 fk 2.54 0.010 b2 1.65 2.39 0.065 0.094 l 14.20 16.10 0.559 0.634 b3 1.65 2.37 0.065 0.094 l1 3.71 4.29 0.146 0.169 b4 2.59 3.43 0.102 0.135 n 7.62 bsc 0.3 b5 2.59 3.38 0.102 0.133 ? p 3.56 3.66 0.14 0.144 c 0.38 0.86 0.015 0.034 ? p1 - 6.98 - 0.275 c1 0.38 0.76 0.015 0.030 q 5.31 5.69 0.209 0.224 d 19.71 20.70 0.776 0.815 3 r 4.52 5.49 1.78 0.216 d1 13.08 - 0.515 - 4 s 5.51 bsc 0.217 bsc 0.10 a c m m e n (2) (3) (4) (4) (2) r/2 b 2 x r s d see view b 2 x e b4 3 x b 2 x b2 l c (5) l1 1 2 3 q d a a2 a a a1 c ? k b d m m a (6) ? p (datum b) fp1 d1 (4) 4 e1 0.01 b d m m view a - a thermal pad d2 dde e c c view b (b1, b3, b5) base metal c1 (b, b2, b4) section c - c, d - d, e - e (c) planting lead assignments diodes 1. - anode/open 2. - cathode 3. - anode
legal disclaimer notice www.vishay.com vishay revision: 12-mar-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products no t expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale , including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding th e design or manufacture of the part. please contact authorized vishay personnel t o obtain written terms and conditions regardin g products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu.
|
